The introduction of the relevant knowledge.
2015/9/3 13:49:00
Grinding head is abrasive, abrasive bonded together with a binder, generally installed on the grinder, grinding machine, polishing machine, or special installation tools, through the processing of the workpiece, in order to achieve the grinding, grinding, polishing effect. Press to use, mainly divided into several grinding head:
1. Grinding type: mainly installed on the wheel head of a grinding machine, on the workpiece internal grinding, cylindrical grinding etc. grinding, grinding, processing can be divided into coarse grinding and fine grinding
2 grinding type: General for grinding the workpiece, or on the workpiece surface to carry out the accuracy of the processing.
3 polishing type: special to the surface finish (roughness) requires higher processing and use, is the need to separate processing procedures
Electroplated diamond grinding head: high hardness of the diamond itself. It has the nature of artificial and natural, in which the higher the hardness of natural, but due to the scarcity of expensive and expensive. Thus, the market is now the largest use of man-made diamond abrasive products accounted for the majority. Therefore, more widespread use of diamond grinding head, diamond grinding head of the varieties and specifications according to national standards have many kinds of, particularly is in the size and shape of the head. These are to be decided according to the use of diamond grinding head, such as in grinding internal hole grinding head is very outstanding, also it is a common grinding head is a good helper, especially in for difficult to grind materials is particularly obvious. The diamond grinding head with diamond abrasive, metal, ceramic, resin by binder and etc.. To this, diamond grinding head uses more special, grinding inner hole and the other wheel unable to grind place can not help it, mainly for the use of grinding, polishing, grinding. At the same time according to the characteristics of the above, according to the characteristics of the above, the material can be divided into high and hard alloy, non metallic materials. In this regard, compared to the use of diamond grinding wheel and grinding wheel, unique, it high hardness, high compressive strength, good wear resistance, diamond grinding wheel in the grinding process become the ideal tool for grinding of hard and brittle materials and hard alloy, use it to grinding not only high efficiency, high precision and rough degree, the consumption of grinding wheel is less, long service life, and can also improve the working conditions. Therefore, in the use of the diamond grinding wheel is more and more obvious. It is widely used in ordinary wheel to processing the low iron content of metal and non-metallic hard and brittle materials, such as hard alloy, onyx stones, high aluminum porcelain, optical glass, semiconductor materials, such as stone. In the grinding industry, because of the different material and the choice of the material is different from the abrasive properties of the same. Electroplating grinding head is one of a kind, it is made of diamond or CBN abrasive, especially on the grinding difficult to grind materials, high accuracy requirements of materials, super hard material grinding can play an important role. Now production methods more and more technical specialization. Electroplated diamond grinding wheel. Due to low concentration of the different results, so the production electroplating grinding head is to according to the cause and different requirements and the choice of different particle size of, the following normal size: 80#, 100#, 120#, 150#, 180#, 220#, 320#, 400#, 600#, 800#, 1000#, 1200#, 1500#, 2000# etc., the diamond grinding head using information please refer to the station about the content of the introduction, as long as the customer sample pattern, whether in product performance and specifications, we can according to customer requirements to make satisfactory products.